simultaneous interpretation equipment  system translation BE-IR6M
·Can distribute audio channels.
·Can be used with other conference system.
·Flexible configuration of channels and channel quality modes for efficient distribution introduction.
·The transmitter is the central element in the system. It accepts analogue input, modulates, these signals onto carrier waves and transmits these carrier waves to radiators located in the room.
·Auxiliary mode for distribution of music to all channels during a break.
·Slave mode for distribution of signals from another transmitter allows multiple rooms to be used.
·Test mode which produces a different frequency tone for each input/channel, with the tone gradually rising as the channels are stepped through.
·Built-in mini infra-red radiator for audio monitoring.
·Automatic standby/on function.
·Stylish 19” (2U) housing for tabletop use or rack mounting.
·Handgrips for easy transportation.
·Power on/off switch on the panel.
·Connectors for input of asymmetrical audio signals.
·BNC connectors for output of HF signal.

Specification
 

simultaneous interpretation equipment  system translation BE-IR6T
·Automatic gain control ensures the IREDs (infra-red emitting diodes) function with maximum efficiency.
·These radiators are used to distribute infra-red signals throughout the conference venue, enabling delegates to listen to the proceedings by means of personal receivers.
·LED indicators for radiator status checking.
·Communication between radiator and transmitter for easy checking by the operator.
·Automatically switches on when transmitter is switched on.
·Automatic cable termination simplifies installation.
·Temperature protection circuitry automatically switches radiator from full- to half- power if the temperature becomes too high.
·Adjustable radiator angle ensures maximum coverage.
·IREDs protected by a cover plate, making the units easy to maintain and clean.
·Attractive and stylish design.
·HF input and output connectors (BNC) for connection to transmitter and loop-through to other radiators.

simultaneous interpretation equipment  system translation BE-IR6R
·Number of available channels is always the same as the number of channels in use by the system, eliminating the need to scroll through unused channels.
·These ergonomically designed receivers incorporate the latest electronics technology - including a specially designed.
·The receivers can be used for both language and music distribution.
·Audio signal automatically muted when signal is too low,ensuring that the user receives only high quality audio.
·Clip for easy wearing.
·Measurement mode for easy checking of radiator coverage.
·Attractive and stylish design.
·On/off button.
·Volume control slide adjuster.
·Channel selection up/down buttons.
·3.5 mm (0.14 in) stereo jack output socket for headphones.

simultaneous interpretation equipment  system translation BE-IR6F
·Quick switching between the floor language and the channel set on the channel selector reduces the chance of operator errors.
·Electronic channel interlock function prevents interpreters in different booths from using the same output channel.
·Interpreter desks can be loop-through connected within and/or between interpreter booths.
·Auto relay enable function allows the interpreter to provide the auto relay language for relay interpretation.
·The channel B disable function allows the interpreter to disable channel B while ensuring that the desk remains connected to channel A.
·Headphone volume, treble and bass controls.
·Channel selector key with channel select indicators.
·Channel engaged indicators to show which channels are in use by other interpreters.
·Microphone ‘mute’ key.
·Microphone activating key with LED status indicator.
·Select key with LED indicators for fast switching between the original floor language and the channel set on the channel selector.
·3 m (10 ft) cable terminated with a 25-pin sub D-type connector.
·25-pin sub D-type socket for loop-through connections.
·3.5mm stereo jack headphone connectors.